Temporary Anchor Points & Removable Eyebolts

Removable eyebolts are designed for use with a compliant safety lanyard and full body harness.

Removable eyebolts offer an aesthetically pleasing solution for buildings that do not need permanent eyebolts. They work in connection with davit arms systems and abseiling anchors. The safety lanyard must incorporate an energy absorbing shock absorber and be no more than 2m long.

Removable eyebolts, as well as any fall arrest system used for Work at Height must be inspected and compliance tested once every 12 months, Altus Safety offer complete compliance testing to ensure that these systems are approved to regulatory standards. We guarantee that our removable eyebolt sockets conform to the standards set by BS EN 795: 2012 A, BS 7883 2019.

The Key Benefits for using Removable Eyebolts and Temporary Anchor Points

Aesthetically pleasing - the anchor is removed and the socket covered with an end cap when not in use
Ideal for installations where a large number of single-point anchors are required
Removable anchors can be used in fall restraint and fall arrest
Suitable for single users, trained to use a harness and lanyard
Available for installation to brickwork, concrete, steelwork, cavity walls and suspended ceilings
Available in a variety materials and finishes

Enquire about this product

16 Questions when choosing a Fall Protection Company

Temporary Eyebolts for Fall Protection | Altus Safety

Removable Eyebolts have been designed so the anchor can be removed and the socket covered with an end cap when not in use, making them aesthetically pleasing. These systems are Suitable for single users, trained to use a harness and lanyard and can be used in fall restraint and fall arrest.
Removable Eyebolts are available in a variety materials and finishes and offer various sockets for installation to brickwork, concrete, steelwork, cavity walls and suspended ceilings.
Materials:
Stainless Steel
Finishes:
Powder Coated to any RAL colour

Brass Finish
Removable anchors are suitable for installation into brickwork, concrete and steelwork, they are also available for installation in cavity walls, floors and suspended ceilings.
Fall arrest and restraint systems will require rescue plans and rescue training. These systems and any associated PPE equipment must be inspected before and after every use by a trained user.
They must be inspected & tested by a suitable working at height Specialist Company a minimum of every 12 months and/or after every fall.
Removable anchors comply with the following standards:
EN795:1996
BS EN 7883
Testing/Inspection standards and frequency:Class A1 Fall Protection systems under BS EN 795 and BS EN 7883 – a minimum of every 12 months.
Removable anchors are also known as:
Removable anchor, discreet anchors, hidden eyebolts
These systems are commonly installed in the following sectors:
Residential
Industrial
Offices
Retail
Hotels / Leisure
Education
Healthcare
Utilities